|
|
 |
钻孔机 >> DR600 >> DR 600 BASIS SINGLE SPINDLE
|
| 今天是
|
|
| |
 |
 |
|
|
产品编号： |
112217103116 |
产品名称： |
DR 600 BASIS SINGLE SPINDLE |
规 格： |
|
产品备注： |
·Designed specially for small PCB shop to replace manual drilling / routing operation.
·Spindle can be used both for drilling and routing. Optional digitizing unit to converse machine for programming purpose.
·Machine runs without compressed air to simplier facilities set up.
·Simple programming method, can also accept data directly from most of PCB design tool drill output.
·Compact machine design to facilitate many machines in small area. |
产品类别： |
钻孔机 |
| |
|
产 品 说 明 |
| 
SPECIFICATION |
| Machine Dimension |
| Machine |
1435(H)*800(W)*900(D)mm |
| Vacuum System |
1173.5(H)*724(W)*360(D)mm |
| Total Weight |
approx.600kgs |
| Electrical Supply |
| Machine |
1.2KW 220VAC（Single Phase） |
| PCB Loading |
Manual Loading |
| PCB Locating |
Fix Pin and Calibrated slot |
| Work Table |
X = 610mm, Y = 410mm |
| Work Area Dimension |
600mm x 400mm |
| Routing Spindle |
60,000rpm A/C Spindle (Water-cooled) |
| Router Bits |
1/8" Shank Carbide Bits |
| Drilling Speed |
In Feed Rate up to 200 mm/s |
| Routing Speed |
Max. 20 mm/s |
| Positional Speed |
10 m/min for Drill and Route |
| Routing Accuracy |
± 0.025mm |
| Tool Life Control |
Programmable |
|
|
 |
|
| 点击数：1652 录入时间：2008-11-22 【打印此页】 【关闭】 |
|
|
